GN760 Thermoformer

The GN760 is a Plug-Assist Thermoformer incorporating GN Thermoforming Technology achieved through continuous research and development.


Forming Area	762mm x 534mm (30" x 21") maximum
Knife Length (maximum)	8500mm (335") for APET / 9525mm (375") for other thermoformable materials
Depth of Draw	125mm (4.92") below sheet line15mm (0.59") above sheet line
Running Power Consumption	28 Kilowatts/hr (Approximate)
Air Consumption (Approximate)	4400 nL/min @ 6.2 bar (155 SCFM @ 90 PSI)
Machine Dimensions (l x w x h)	10400mm x 3650mm x 2930mm (410" x 144 " x 116 ")
Machine Weight	7300 kgs (16100 lbs)
Material Thickness Range	0.25mm - 1.50mm (0.010"-0.060")
Air Pressure	6.2 bar (90 PSI) minimum / 9.6 bar (140 PSI) maximum
Cooling Water Consumption	65 - 150 litres/min (17 - 40 gallons/min)
Sheet Width	815mm (32") maximum
Material Roll Diameter	1000mm (39")
Main Supply Voltage	3 Phase + N + PE, 50-60 Hz (380-480V)

GN760